Brand: Imaginative Lighting
Product dimensions: 19.5 x 21 x 9
Requires 3 x AA batteries
Product video: https://vimeo.com/82321574
Cordless power eliminates the chance of cord strangulation.
Never gets hot, uses LED lights so always stay cool to the touch.
All lights are entirely lead free.
LEDís are the purest form of electricity (they do not discharge dirty electricity which is harmful to health).
Energy efficient Ė uses LED lights.
All lights are wall mounted on top of the unique crack sticker making it appear the light has broken
through the wall.
Sport lights are sized to reflect realistic appearance.
Easy On/Off switch.
CONVENIENT + PRACTICAL
All lights provide a comforting light for infants and children to fall asleep.
All lights provide enough light for parents to view the infants without turning on additional lighting.
Children can move about the room and take themselves in and out of their beds without turning
on additional lighting.
Can be placed close to the cot, bed or anywhere in the room (not restricted to outlet locations).
How to install your 3D Crack Sticker
Unfold sticker and flatten creases.
Place sticker at desired location, place tape (painterís tape or similar) at the edge of the top of the sticker and mark arrows on tape and sticker for placement reference.
Carefully remove the back of the sticker.
Align arrows and carefully stick the top (top 1-2 inches) of the sticker to wall, make sure you hold the bottom portion away from wall.
Use a credit card or dull flat surface to slowly adhere the sticker, pressing against the paper backing, removing any air bubbles that may arise, remember to keep the bottom part of the sticker off the wall as you work your way down, out and towards the edges until the end.
Very slowly peel off the paper from the wall, making sure that the (fine edges) are stuck to wall. If any of the sticker peels up with the paper, simply put back against wall and press firmly with credit card until sticker adheres to wall.
Drill a hole in the spaces marked X and inset the wall plug, provided. Insert the screws provided to approximately 3/4 of the way and place light onto screws.