RTX Wireless Phone Jack (Extension Unit Only)

RTX Wireless Phone Jack (Extension Unit Only)
Zoom  Zoom
Our Price:  €17.99
List Price:  €19.99
Saving Of:  10%

Brand:  RTX

Availability:  

In stock, immediate despatch  

SUPPORTED STANDARDInterface: 1.8 GHz DECT air interface using DECT authentication and encryption PSTN INTERFACE EXTENSION UNITLine voltage: 3 intervals from base unit to extension unit- No line: <3V- Parallel telephone off hook: 3V < voltage < 18V- Idle line: > 25VRinger signal: 25Hz ringer signal on extension unitExtension unit ringer signal (square wave) with >=50VRMSPSTN INTERFACE BASE UNITLine interface: European TBR 37/38 with DTMF and optional pulse dialing supported REN: < 0.1REN load from base on telephone lineCLI SUPPORTStandard: Bellcore 202, V.23 (EU)Signal modes:- FSK DT-AS reception and generation- FSK RP-AS reception and generation- DTMF reception and generation in extension unit without pol-reversalSignal content:- Calling line identity (EN 300 659-3)- Calling party name (EN 300 659-3)CONNECTORSBase station: Two RJ11 plugs on base for connection to PSTN line and plug through to other PSTN servicesExtension unit: One RJ11 plug for attachment to modem, fax or telephoneMECHANICSDimensions size: 75(W) x 60(D) x 95(H) mmWeight: <100gOperating temperature: 10 40C (for indoor use only)LED signaling: MMI - 1 color (green)LED on base and 3 color (yellow, greenPOWERSPower supply: 230V +/- 10%Power consumption:- Idle mode: <1W.- Active mode: <3.1W.- Active mode ringing: <3.1W.APPROVALSSafety:- IEC 60695-2-11 (Glow Wire)- IEC 60950 (CE)DECT:- TBR 10- TBR 37- TBR 38- TBR 6- EN 300 444 GAPEMC:- EN55022- IEC 61000-4 and 64000-3- IEC 1000-4 (over voltage and current)Environmental:- RoHS and WEEE.- IEC 60068More info:http://www.rtx.dk/Wireless_PHONEjack-2715.aspx

Free shipping on all orders over 100!


Features
Plug and Play
Flexible
Supports phone, fax and set top box
No new wires
The Wireless PHONEJack uses DECT technology from RTX in a special configuration, enabling modem signals to be transmitted at speeds of up to 56 Kbit/s based on the V.34 and V.90 standards.
KEY FEATURES
Add an analog phone line without new wiring
Support for Dial-Up modems, fax, phones, VoIP ATA and set-top boxes
Move your phone line in a second to any place near a socket
Flexible solution
Connect further extensions cost effectively and easily
GENERAL FEATURES
High wireless modem signals: High-speed analogue V.90/V.92 and V34 modem signals with up to 56Kbit/s (minimum of 28.8Kbit/s)
Scalability: Connection of up to 4 extension units to a single base unit Voice call priority over modem and fax calls both for parallel telephone, telephone on extension and handset
Auto conference call: Barge in (auto conference call) between handsets and the external line
Compatible: The base unit supports GAP handsets. Internal calls support for handset
Extra extension unit: Registration of extra extension unit by easy cable connection between base and extension unit


Continue ShoppingTell a Friend