Ubiquiti NanoStation M5 5GHz - NSM5 (EU Clover Powercord)

Ubiquiti NanoStation M5 5GHz - NSM5 (EU Clover Powercord)
Zoom  Zoom
Our Price:  €120.59
List Price:  €133.99
Saving Of:  10%

Brand:  Ubiquiti

Availability:  

In stock, immediate despatch  

VIDEO
https://www.youtube.com/watch?v=__xzHnK6IVs
TX Power regulation: yes
Comformity: FCC, CE
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt
DHCP: yes
Dimension: 294 x 80 x 30 mm
Encryption: WPA, WPA2
Frequence: 5,4 - 5.825 GHz
Gain: 16 dBi
Chipset: Atheros
Interface : LAN, WiFI
IPv6 support: Transparent (Bridge mode)
LAN port: 2x RJ45 10/100 Mbps
Max. output power: 27 dBm
Modulation: OFDM
NAND: 8 MB
Operation mode : AP, Client, WDS
Operational temperature: -30 ~ 80 C
OS: AirOS V
Polarization: H/V
Power supply: 15 V, 0,8 A
Procesor: MIPS 24KC, 400 MHz
Radiating angle - H: 43/41
Radiating angle - V: 15
RAM: 32 MB
Sensitivity: -96 dBm
Standards: 802.11a/n
Transmission speed: 300 Mbps
Weight: 0,4 kg
http://dl.ubnt.com/datasheets/nanostationm/nsm_ds_web.pdf


Free shipping on all orders over 100!


The Ubiquiti NanoStation M5 is a powerful all-in-one outdoor unit including 2 x 16 dBi antenna (MIMO) for the 5 GHz band. Unit allows real communication speeds up to 150 Mbps.
Another advantage is, beside of high data transfer rates thanks to the use of 802.11n standard, time multiplex TDMA, which allows the unit in the AP mode connect multiple clients with low latency.
Web administration is very simple and clear. Settings include:
AP mode, client or WDS
Traffic shaping
QoS
Between WAN and LAN routing and transparent bridge, with or without NAT NAT
Antenna polarization (vertical / horizontal / adaptive)
Disable or enable the output for an external antenna
Signal strength, which correspond to the specific LED indicator
Output power up to 27 dBi
In package is included a 24 V power supply and PoE injector, with the reset button which put device into TFTP firmware recovery mode.


Continue ShoppingTell a Friend