Home > networking > switches - PoE
Technical specification: Dimensions: 93 x 57 x 38.2 mm (3.66 x 2.24 x 1.50")Processor : Atheros MIPS 74KC, 560MHzMemory : 64 MB DDR2Buttons :(1) Reset U-Installer(1) Reset External airMAX Device(1) Power On/OffNetworking Interfaces: (1) 10/100 Ethernet PortWi-FiPorts : (1) USB-C PortPassive PoE Output: Voltage: 24VMax. Power: 12WManagement Interface: Wi-FiWi-Fi Frequency : 2.4 GHzWi-Fi Standards: 802.11b/g/nPower Method : Internal BatteryUSB Mobile Battery Pack: 5V, 3A (Not Included)Power Supply: 5V, 3ASupported Voltage Range: 4.95 - 5.05VMax. Power Consumption : U-Installer: 3WU-Installer with CPE: 15WLEDs :(1) Wi-Fi(4) BatteryESD/EMP Protection: 24kV Contact / AirOperating Temperature: 0° to 35° C (32° to 95° F)Operating Humidity : 5% to 95% NoncondensingCertifications : CE, FCC, ICDatasheet:https://dl.ubnt.com/datasheets/uinstaller/U-Installer__DS.pdfWarranty:Contact Ubiquiti Technical Support via https://rma.ubnt.com/ and obtain RMA reference. Call PCS Customer Services with RMA reference to arrange repair/replacement. Warranty valid for 12 months from date of purchase.
Free shipping on all orders over €100!
The U-Installer makes installing airMAX® Customer Premise Equipment (CPE) devices easier and more efficient. Position, provision, and configure the CPE device at the point of installation using a tablet or smartphone. The U-Installer provides Wi-Fi connectivity to the CPE management interface during installation, so provisioning and final adjustments can be made with a tablet or smartphone. The U-Installer also provides 24V PoE to the CPE, making installation easier. The Wi-Fi functionality allows the U-Installer to be used with devices that don't support 24V PoE. The U-Installer gives you the ability to configure your CPE device through its Wi-Fi management radio and the UNMS™ app. Broadcasting its own SSID, the U-Installer allows mobile devices to connect wirelessly to the same network as your CPE device. This simplifies both device discovery and configuration. The UNMS app provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play™ (Android). UNMS allows you to set up, configure, and manage your CPE devices.