Ubiquiti UniFi UAP AC nanoHD AP/Hotspot - UAP-nanoHD (EU Clover Powercord)

Ubiquiti UniFi UAP AC nanoHD AP/Hotspot - UAP-nanoHD (EU Clover Powercord)
Zoom  Zoom
Our Price:  €213.29
List Price:  €236.99
Saving Of:  10%

Brand:  Ubiquiti

Availability:  

In stock, immediate despatch  

Dimensions : 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")
Weight : 300 g (10.6 oz)
Weight With Mounting Kits: 830 g (1.83 lb)
Networking Interface: (1) 10/100/1000 Ethernet Port
Buttons : Reset
Power Method : 802.3af PoE
Power Supply : UniFi Switch (PoE)
Power Save : Supported
Beamforming : Supported
Maximum Power Consumption: 10.5W
Supported Voltage Range : 44 to 57VDC
TX Power :
2.4 GHz: 23 dBm
5 GHz: 26 dBm
MIMO :
2.4 GHz: 2x2
5 GHz: 4x4
Radio rates:
2.4 GHz: 300 Mbps
5 GHz: 1733 Mbps
Antennas :
2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each
5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each
Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
802.11w/PMF
BSSID : 8 per Radio
Mounting : Wall/Ceiling (Kits Included)
Operating Temperature: -10 to 70 C (14 to 158 F)
Operating Humidity : 5 to 95% Noncondensing
Certifications : CE, FCC, IC
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM : Voice, Video, Best Effort, and Background
Concurrent Clients: 200+
Supported Data Rates (Mbps)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n : 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40)
802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
802.11b : 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps


Free shipping on all orders over 100!


Performance for Demanding Environments
Ubiquiti's UniFi AP nanoHD is an indoor 802.11ac Wave 2 access point tailored for deployments too demanding for a UniFi AC Pro but less demanding than the UniFi AC HD. Similar in size to the popular UniFi AC Lite, the UniFi AP nanoHD High Density Access Point offers speeds of up to 1733Mbps at 5Ghz and 300Mbps at 2.4Ghz.
PoE Powering
The device is powered via a single Gigabit Ethernet port using either a Ubiquiti UniFi switch or an 802.3af-compliant PoE injector (included).
Remote Controller
As part of Ubiquiti's UniFi range, the UniFi AP nanoHD is a revolutionary WiFi system that combines enterprise performance, unlimited scalability, and a central management controller. Using the UniFi Controller software to quickly configure and administer an enterprise WiFi network requires no special training. Within the UniFi Controller software, RF map and performance features, real-time status, automatic Access Point device detection, and advanced security options are all seamlessly integrated.
This is a single unit UniFi AP nanoHD version, with PoE injector.
Product Features
Wave 2 Radio
Small Form Factor
4x4 MU-MIMO
Package Contents
1x Quick Start Guide
4x Screw Anchors
4x Keps Nuts
4x Flat Head Screws
4x Screws
1x Ceiling Plate
1x UAP-nanoHD
1x 48v 0.5A PoE Injector
1x EU Mains Cable


Continue ShoppingTell a Friend